Selection Guide Of A Diverter Valve

There are five factors which you must consider to choose a diverter valve is material, safety features, valve size, number of diverters and cost concerns.

Before buying a diverter valve for your garden, pool or any other systems or applications, here are important factors to consider that will help you pick the right one. Follow this simple guideline and have the best blowoff valve that will greatly serve the purpose of your applications.

1. Valve Material Make up

Valve and pump systemsare primarily designed to facilitate the flow of fluid to different parts. Depending on the material composition, there are specific valves that can handle specific kinds of fluid such as plain water, chemical-treated water, and any other fluid mixed with some hazardous components. There are also types that can handle sticky, abrasive, high-pressured, and fluid with extreme temperatures (too cold or too hot).

Manufacturers make valves with diverters usually from high-grade steel, stainless steel, ceramic and PVC. Choose the valve type that matches your system’s fluid. This is to prevent any untoward incidents such as leaks.

2. Safety Features

Valves, especially those that are used in industrial applications should be properly equipped with safety features. The whole valve system should have visual tags. This will help inspectors and other people who are working with the valves have clearer vision of which parts to touch, twist, rotate, pull or lift.

Safety features will not only protect your workforce from incurring any workplace accident or injuries. They will also protect your property and your business.

3. Valve Size

The valve size should be able to handle the pressure of the fluid that will flow through the pipes connected to it. This is to lessen the possible occurrences of breakages, leaks and fissures brought by strong fluid pressure. Large diverter ports can support larger pipes. This means that it will be able to handle higher volume of liquid and stronger pressure too. Smaller diverter ports are stable for use in directing fluid of smaller volume or with weaker pressure.

4. Number of Diverters

Diverter valves are primarily utilized due to its capacity to diverge the fluid into several directions. Most types have two to three diverters. This is an essential consideration especially if your system is designed to combine two or more fluid from different sources into one spot.

If your system needs to combine fluid from greater sources, some manufacturers have four diverters or more. For efficient fluid flow from different sources, careful systems design must be carried out.

5. Cost Concerns

This factor is of a very wide coverage. Combining all the other factors will come down to the expenses that you will incur when purchasing the right valve for your application. The cost will also be dependent on the brand that you will pick up. Installation cost is another associated sub factor.

By considering the five factors when choosing valves with diverters, be geared up to receive the benefits that come with it. Save the most that you can, not only in terms of money, but also in the time and effort that you will exert on the canvassing and actual purchasing tasks. With these factors in mind, have lessened time associated with researching for different diverter valve. Look at the article about a review of the Hayward SP0727 Perflex Diverter valve to get more knowledge of a diverter valve.